Easy How to make Legs for a cornhole board.
To make cornhole legs, you will need the following materials:
2x4 wooden boards
Saw
Measuring tape
Screws
Drill
Here are the steps to make cornhole legs:
Cut the 2x4 boards into four pieces, each 21 inches long, to create two legs for the cornhole board.
Measure and mark the center of one end of each board.
From the center mark, measure and mark 3 inches on each side.
Draw a 30 to 45-degree angle line from the 3-inch marks to the bottom corners of the board to create the angled shape of the legs.
Cut along the marked lines to create the angled shape of the legs.
Once the legs are cut, attach them to the cornhole board using screws and a drill. The legs should be attached to the back of the board, allowing the board to stand at an angle when in use.
This simple guide can help you create your own cornhole legs for the cornhole boards. Always ensure the legs are securely attached to the board to maintain stability during play.
