DIY: Fast and Easy Cornhole Board Leg Creation in Minutes
The fastest and easiest way to make legs for a cornhole board involves using pre-made folding leg brackets. These brackets are widely available and can be easily attached to the underside of the cornhole board. Here's a quick guide:
Materials Needed:
Cornhole board
Folding leg brackets (available at hardware stores or online)
Screws
Drill
Measuring tape
Instructions:
Position the Cornhole Board:
Place the cornhole board upside down on a stable surface.
Attach Folding Leg Brackets:
Take the folding leg brackets and position them near each corner of the board. Make sure they are evenly spaced. Mark the screw holes on the board using the holes in the brackets as a guide.
Pre-Drill Holes:
Use a drill to pre-drill holes where you marked the screw hole locations. This helps prevent splitting when you attach the brackets.
Attach Brackets:
Securely attach the folding leg brackets to the cornhole board using screws. Ensure they are tightly fastened for stability.
Test the Legs:
Flip the cornhole board upright and test the folding legs. Make sure they unfold easily and provide stable support.
This method eliminates the need for cutting and angling legs, making it a quick and straightforward option. Folding leg brackets also allow for easy storage and transportation of the cornhole board.
Please note that the availability of specific brackets may vary, so be sure to check with your local hardware store or online retailers for suitable folding leg brackets. Always follow safety guidelines and wear appropriate safety gear when using tools.
